What are common problems with Sony Bravia TV?

How much it costs to repair a sony bravia screen

Newer models of Sony TVs have LED lights that flash at different times and in different colors to indicate that they have detected an error. Below is a list of the most common LED indicators and their meanings:

Sometimes what seems like a serious problem can be solved with a simple solution. It’s easy to ignore the obvious, especially if we automatically assume the worst. You’d be surprised how often thinking calmly leads to an excellent problem-solving method.

Sony bravia vertical stripes

There is nothing more annoying than when you see someone’s mouth moving, but what you are hearing is out of sync. You see someone’s mouth say “hello”, but then you hear “hello” after the mouth stops moving. It’s like watching a foreign movie with a voice-over. You should go to the audio settings on your TV or cable box and adjust the “audio delay”. This should bring it back in tune.

If you are hearing an echo, you probably have a separate sound system, such as a soundbar or surround system, and the volume is playing through both the external sound system and the TV speakers.

The sound is garbled, intermittent or distorted, or there is a picture but no sound. If you have already tried unplugging and plugging the TV back in, unplug your cable or satellite box from the wall outlet. Plug it back in after 30 minutes and see if the sound problem is resolved. If so, the problem is with the cable or satellite box. If you replace it, the problem will be solved.

Read more  What is the full form of RICS?

Tv sony bravia turns on and off immediately

C. To check if the influence is due to external devices connected to the BRAVIA TV, remove the cables (USB, wired LAN, HDMI, antenna cables except the AC power cord (power cord) and check if this symptom occurs.

D. Check for improvement by setting [Idle TV Standby] to [OFF].When the TV standby function is activated, the BRAVIA TV will automatically turn off due to monitor idle time.If any option other than OFF (e.g. 1h) is selected in Settings* → System Settings → Eco → Idle TV Standby, change the option to OFF.

E. Check for improvement by setting [On Timer] or [Sleep Timer] to [OFF].When the On Timer or Sleep Timer function is activated, the BRAVIA TV will automatically turn off after the preset period.Check the following settings in Settings* → System Settings → Clock/Timers.

My sony bravia TV does not turn on.

THE EAST-WEST CORRECTIONS ARE IMPOSSIBLE TO ADJUST AND IT HAS A LOT OF WIDTH, AFTER TRYING EVERYTHING IN THE CORRECTOR STAGE I WENT TO THE CAPACITORS THAT ARE LOCATED IN PARALLEL WITH THE DAMPER DIODES OF THE HIGH VOLTAGE ZONE, SPECIFICALLY THE 11K CAPACITOR C-805 WAS DEVALUED.

Replace C816 (4.7uF, 250v). The capacitor is located in the HV section and is numbered x8xx. If this number does not match any model and you have the same problem, locate all the 4.7uF/250V capacitors in that zone and replace them. (There should not be more than two or three).

If the power tr Q601 and Q602, (2SC4834=BUT12AF) are shorted, we must check the following components: The R601 of 0.1ohm, the transistor 2SC3225, the capacitor C650 of 10mf.

Read more  When can I do my tax return 2022 canada?

Fault located in the I/O circuit. The sawtooth oscillogram of the vertical frequency does not appear on pin 5 of the LM 393 integrated. The collector of transistor Q-803 shows 0v instead of 19v. R-838 10 Kohms of SMD type is cut.

What are common problems with Sony Bravia TV?
Scroll to top