How to start a greenhouse
Excellent help for summer residents can be a polycarbonate greenhouse. With the help of such a greenhouse, you can get a good crop of early vegetables, protect seedlings in the spring and even arrange a flower greenhouse in it.
It is not difficult to assemble a greenhouse made of polycarbonate with their own hands, however, to make it last for a long period, it is necessary to fill the foundation of the greenhouse on which the structure will stand.
It is very important to lay the foundation correctly. Since such a greenhouse belongs to the category of lungs, it is possible to cope with the task if you pour a tape, cement base under the greenhouse.
After that, all the parts are connected and firmly fixed with jumpers. Further, the support profiles are mounted vertically on the rounded corners and bolted to the horizontal bases with bolts.
When installing the support profiles, it should be noted that they should be 2-3 pieces on each wall surface. They should not be attached too tightly to the bottom brackets, as the polycarbonate sheets will later be inserted into these slots.
How to make a wooden greenhouse
The first phase of the construction and assembly of a greenhouse is the leveling of the surface where it is installed, which entails the relevant earth movement for the correct leveling according to the criteria of water evacuation and inclinations that allow to improve the working conditions in the greenhouse.
Placement of pillars and foundations. The foundation of the pillars consists of cylindrical concrete footings made on site. The installation of the pillars is done once the concrete of the footing has been poured. Previously, an anticorrosive treatment is applied to the base of the pillars with tar. Once installed, the pillars are checked to ensure that they are not inclined and the concrete is left to set.
Once the assembly of the structure itself is finished, the roofing material is installed and the remaining finishing touches are completed by installing the auxiliary installations, such as the zenithal window opening system, the greenhouse doors, etc.
A homemade greenhouse is the best option to have our own fruit and vegetable plants and grow them in our home free of dyes, preservatives, and with quality. If you like gardening, in unComo we will tell you how to make a homemade greenhouse in a simple and economical way.
Another tip is to build the greenhouse facing south, so the plants will receive more hours of sun. Then you should level the ground as much as necessary and lay the foundations of what will be our greenhouse with iron pipes and concrete so that everything is well fixed.
Greenhouse construction pdf
The base also increases the bearing strength of the frame. On this basis, you can already install more complex systems, while the presence of the base minimizes the destruction of the structure and does not allow to influence it from the outside.If the greenhouse is raised above the ground, this approach allows you to save more heat inside – This way you can minimize the cost of heating the system.The base is a barrier to the penetration of moles and other similar pests inside the building. This applies only to concrete and brick foundations that are buried in the ground. If only wood lumber is used as a support, it will not be saved from rodents.
The foundation for a greenhouse is a support that will affect the quality of growth of all plants, therefore, when constructing it, the type of foundation must be determined correctly. Today for such purposes are used various types of bases:
Today, very often for the construction of greenhouses using polycarbonate. It is much lighter than glass, so almost all types of foundations can be used for such structures. But experts still recommend to give preference to bases made of concrete, brick or other solid mineral product.